دمج خطين على المايكروتك Load Balance two line in mikrotik

دمج خطين انترنت متساويين السرعة لعى اى روتر بورد او كيسة مايكروتيك

كل اللى عليك تتابع الفيديو اللى فى الشرح وترمى الاسكريبت الخاص بخطين مايكروتيك ده

دمج خطين adsl,دمج خطين نت,دمج خطين مايكروتك,روتر ميكروتك,دمج خطين انترنت,روتر ميكروتك

الفيديو

الاسكريبت

/interface 
set ether1 name=WAN1
set ether2 name=WAN2
set ether5 name=Local




/ ip address
add address=192.168.88.1/24 interface=Local comment=OUT
add address=192.168.1.5/24 interface=WAN1 comment=Line1
add address=192.168.2.5/24 interface=WAN2 comment=Line2






/ip firewall mangle
add action=accept chain=prerouting disabled=no in-interface=WAN1
add action=accept chain=prerouting disabled=no in-interface=WAN2


add action=mark-connection chain=prerouting disabled=no dst-address-type=!local \
    new-connection-mark=wan1_conn passthrough=yes per-connection-classifier=\
    both-addresses-and-ports:2/0 src-address=192.168.88.0/24
add action=mark-connection chain=prerouting disabled=no dst-address-type=!local \
    new-connection-mark=wan2_conn passthrough=yes per-connection-classifier=\
    both-addresses-and-ports:2/1 src-address=192.168.88.0/24


add action=mark-routing chain=prerouting connection-mark=wan1_conn disabled=no \
    new-routing-mark=to_wan1 passthrough=yes src-address=192.168.88.0/24
add action=mark-routing chain=prerouting connection-mark=wan2_conn disabled=no \
    new-routing-mark=to_wan2 passthrough=yes src-address=192.168.88.0/24



/ip firewall nat
add action=masquerade chain=srcnat disabled=no out-interface=WAN1 \
    src-address=192.168.88.0/24
add action=masquerade chain=srcnat disabled=no out-interface=WAN2 \
    src-address=192.168.88.0/24


/ip route
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
    192.168.1.1 routing-mark=to_wan1 scope=30 target-scope=10
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
    192.168.2.1 routing-mark=to_wan2 scope=30 target-scope=10


add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
    192.168.1.1 scope=30 target-scope=10
add check-gateway=ping disabled=no distance=2 dst-address=0.0.0.0/0 gateway=\
    192.168.2.1 scope=30 target-scope=10





/ip dns
set allow-remote-requests=no cache-max-ttl=1w cache-size=2048KiB max-udp-packet-size=512 servers=8.8.8.8,8.8.4.4


/system ntp client
set enabled=yes mode=unicast primary-ntp=41.128.225.225 secondary-ntp=8.8.8.8

/system clock
set time-zone-name=Africa/Cairo

/system identity
set name="shadysoft(01009661565)"


/ip dhcp-server network
add address=192.168.88.0/24 dhcp-option="" dns-server="" gateway=192.168.88.1 \
    ntp-server="" wins-server=""

/ip pool
add name=dhcp_pool1 ranges=192.168.88.2-192.168.88.254

/ip dhcp-server
add address-pool=dhcp_pool1 authoritative=after-2sec-delay bootp-support=static \
    disabled=no interface=Local lease-time=3d name=dhcp1